Roller shutter Paris 75010

The roller shutter faults we repair in Paris 10e

Before replacing anything, the real fault must be identified: a shutter that no longer lifts has different causes depending on whether it is manual or motorised, stuck up or stuck down. Here are the faults we handle every week in Paris 10e — ones our technician recognises within minutes.

Shutter release in Paris 10e: don't force it, call us

Stuck up on a winter evening or stuck down as you leave for work: jams always come at the worst time. The right reaction is simple: stop operating it (every extra attempt damages the winch, motor or slats) and cut power if it is motorised. Our local technician frees the curtain, checks shaft, clips and guides, adjusts the limit switches and explains the cause. Most releases in Paris 10e are completed within the hour.

A jam almost always hides a precise cause that must be treated: broken clips letting the shaft spin free, a dislodged slat wedging the curtain in its guides, a lock left engaged, a frozen end slat in winter, or limit switches driving the motor past its stop. After freeing the shutter, our technician always checks the curtain's full wrap: a shutter released but badly re-wrapped jams again within the week.

Electric shutter failure in Paris 10e: our method

A shutter that stops responding is not necessarily a dead motor: often the fix is a re-paired remote, a worn wall switch, an inexpensive capacitor or limit switches to recalibrate. That is why we always run a full diagnosis of the electrical chain before suggesting a replacement. If the motor genuinely is at the end of its life, we fit an equivalent or better model (from €400), adjust the limits and test everything — usually all in a single visit in Paris 10e.

Our vehicle carries the common electrical parts: capacitors for the main drives, wall switches, radio receivers and tubular motors in standard diameters. In practice this means an electrical fault is almost always fixed within the same visit, including full motor replacement: shaft removal, new motor matched to the curtain's weight, limits reset and full testing.

Strap, winch, crank: manual shutters fixed in Paris 10e

Manual shutter faults are usually modest — a strap worn at its friction points, a winch with stripped teeth, a tired winder — but they immobilise the shutter as surely as a dead motor. Our technicians in Paris 10e arrive with common drive parts and repair in one visit: strap, winch or crank replacement, tension adjustment, shaft and guide checks. Call-outs from €50, price announced before travel.

Replacing a strap is the textbook example of a repair not to postpone: a fraying strap eventually snaps with the shutter closed, usually on a rushed morning. We replace the strap and check the winder, guide and shaft in the same visit — a fast-wearing strap sometimes reveals a curtain grown too heavy or wrapping askew.

Roller shutter motorisation in Paris 10e: go electric

Motorising an existing manual shutter is quick and cost-effective: a tubular motor slots into the current shaft, the strap or winch disappears, and the shutter opens at the touch of a button — remote, wall switch or smart control. From €179: our technicians size the motor torque to the curtain's weight, fit your chosen control and set the limit switches. In Paris 10e, it pairs perfectly with a repair: while the box is open, motorisation costs less.

Technically, motorisation reuses your installation: curtain, guides and box stay in place, only the shaft receives the tubular motor. Three options: wired (the most robust), radio (no wall chasing), solar (no cabling at all, ideal upstairs). We size the motor torque to the curtain's actual weight — an undersized motor wears fast, an oversized one batters the stops.

Drifting limit switches in Paris 10e: the deceptive symptom

A shutter that stops too early, drops too far, strains at the stop or drifts a little more each day usually has nothing broken: its limit switches have lost their bearings. This adjustment — dial-based on older motors, electronic on recent ones — is all about procedure: done wrong, it makes the motor strain and damages the curtain. Our technicians recalibrate limits properly in Paris 10e, often during another call-out, and check the curtain's full alignment.

Adjustment also plays a preventive role: limits set too low make the motor strain against the sill at every closing; too high, they leave a gap that ruins insulation and blackout. After any work on the shaft or motor we recalibrate the limits and run the full travel several times.

Slat and curtain replacement in Paris 10e

Slats cracked by hail, brittle faded PVC, an end slat bent by an impact: while the shaft and guides are sound, there is no need to replace the whole shutter. We replace slats individually (from €70) or the complete curtain to identical dimensions, in PVC or foam-filled aluminium — a chance to gain insulation and security. The job is done cleanly: old curtain removed, new clips, stops adjusted and full testing. Most curtain replacements in Paris 10e take half a day.

The choice of material at replacement time deserves thought: PVC, economical and insulating, suits standard sheltered windows; foam-injected double-wall aluminium is stiffer and wins on wide spans, exposed ground floors and south-facing façades where PVC warps. At equal dimensions, the new curtain fits your existing shaft.

Roller shutter repairs recognised by insurers

Storms, hail, water damage in the box, a shutter forced during a break-in attempt: in all these cases your home or business policy often covers reinstatement. We regularly work with policyholders across Île-de-France: photographic evidence, itemised quotes accepted by insurers, line-by-line compliant invoices, and immediate securing when the home is exposed.

Every type of roller shutter covered

Each configuration has its own access constraints and parts: a tunnel box does not open like a renovation box, a window-block means working from inside, a solar shutter has its own electronics. Our technicians service the whole range:

One number for your roller shutters in Paris 10e

Shutter jammed this morning, silent motor, snapped strap or a motorisation project: in Paris 10e, one call to 07 66 54 96 41 is enough. We announce the price on the phone, the local technician comes 7 days a week with common parts on board, and the vast majority of faults are fixed in a single visit — free quote, price confirmed before any work, parts and labour guaranteed.

Servicing your shutters in Paris 10e: what we check

Preventive servicing always costs less than the breakdown it prevents. During a visit in Paris 10e, our technician inspects everything: slats and end slat, guide cleanliness and alignment, strap tension or winch condition, motor sound and capacitor, limit switches, locks and clips. Every weak point is treated before it becomes a jam. For large homes and buildings we offer yearly maintenance contracts at degressive rates.

Every roller shutter brand repaired

We repair and motorise every major roller shutter and motor brand: Somfy, Bubendorff, Simu, Nice, Becker, plus standard joinery shutters and solar models. Original or equivalent parts, official programming procedures, and an itemised invoice that meets insurers' requirements — useful after a storm or attempted break-in in Paris 10e.

How a roller shutter call-out works in Paris 10e